Heat
Floor
reference
Bathroom renovation in 33829 Borgholzhausen
The homeowners opted for a complete bathroom renovation in their detached house. The bathroom was enlarged by removing a wall and incorporating the former study into the bathroom. A total of 15 m² of underfloor heating was installed. The E-NERGY IQ EPS 20 with the STRONGBOARD 5 heat-conducting layer was used.
- Flooring: Tiles
- Underfloor heating system E-NERGY IQ EPS 20
- Size 15 m²
- Attic area
construction
- Tiles ≥ 10 mm | Natural stone ≥ 15 mm
- STRONGBOARD FL 5 mm
- Adhesive (RollFix ECO)
- E-NERGY IQ EPS 20 + system heating cable 20 mm
- Frame timber (20 mm)
- EPS edge insulation strip | NEO
- If necessary, moisture barrier (bonded to the substrate)
- 25 mm
Tiles ≥ 10 x 10 cm → ≤ 10,000 cm² and max. 120 cm edge length (aspect ratio 1:1 to 3:1)
Joint width: tile ≤ 30 x 30 cm = at least 3 mm; ≤ 40 x 40 cm = at least 4 mm; > 40 x 40 cm = at least 5 mm
Further references
Discover the diverse application possibilities of mfh systems products and take a look at other exciting references!
