Show moreOur IDEAL CLASSIC EPS 30 system can be used for both surface heating and cooling. When installed on the ceiling, the thermally insulated system elements, with factory-applied aluminum heat-conducting plates, are fitted between the battens of the finishing plasterboard panels. The pre-defined pipe routing within the elements facilitates the installation of the heating pipe thanks to the clamping effect of the omega profile. The aluminum plates ensure efficient and rapid temperature distribution across the surface. Installing IDEAL CLASSIC as a ceiling heating/cooling system is ideal not only for new construction but also for energy-efficient renovations, especially when the floor is unsuitable for retrofitting underfloor heating or when valuable flooring needs to be preserved. The system can be installed on solid and suspended ceilings using minimally invasive installation methods. Room by room can be renovated in this way, and so cleanly that it can even be done while the building is occupied. In combination with heat pumps, IDEAL can also be used for gentle cooling, particularly on the ceiling. Instead of heated water, cool water flows through the system. This lowers the room temperature by four to six degrees Celsius – without drafts, noise, or high energy consumption.