Show moreThe SAFETEC reinforcement and decoupling membrane combines the advantages of conventional screed underfloor heating systems with the properties of modern dry construction systems. The result is an underfloor heating system that meets the latest technological standards and is suitable for both renovation and new construction projects. Its low installation height, light weight, and low moisture content, combined with high heat output, fast response time, and freedom of choice for floor coverings, are key features. There is no simpler solution. SAFETEC is installed directly on the heating element, such as the IDEAL CLASSIC EPS 30 or IDEAL TOP EPS 15 systems, and is then covered with a fiber-reinforced leveling compound. A layer of just 1 cm is sufficient to reliably withstand the loads encountered in residential and commercial buildings, such as office spaces. The self-leveling, smooth, and perfectly even surfaces then allow for direct installation of any type of floor covering. SAFETEC is therefore the ideal substrate, especially for LVT and design flooring. Due to its flexibility, the SAFETEC solution is not only suitable for use in small, awkwardly shaped rooms and bathrooms, but also in combination with a pumpable leveling compound for use in large projects.
