Heat
Wall
reference
Renovation of an office in 51063 Cologne
The E-NERGY CARBON FLEECE system, with a heat output of 220 W/m², was installed in the office as supplemental heating. The uninsulated exterior wall was always very cold in winter, and moisture condensed in one corner. Therefore, it was fitted with the Multipor interior insulation system. Subsequently, the E-NERGY CARBON FLEECE system was installed. Today, the office is partially heated solely by the heating foils.
- Wall covering,topcoat plaster
- E-NERGY CARBON FLEECE panel heating
- Size30 m²
- Ground floor area
construction
- Finishing plaster (e.g. Multipor lime smoothing)2 mm
- Multipor lightweight mortar, 5mm
- Multipor reinforcing fabric
- Multipor lime smoothing 1 mm and2 mm
- E-NERGY CARBON FLEECE0.4 mm
- Multipor mineral insulation board60 mm
- Multipor lightweight mortar5 mm
- Multipor hemp felt insulation strips
- 75 mm
Further references
Discover the diverse application possibilities of mfh systems products and take a look at other exciting references!
