Heat
Ceiling
Floor

reference

New construction of a bungalow in 96152 Burghaslach

The building is heated exclusively with the efficient E-NERGY CARBON . Various versions are used, such as the E-NERGY CARBON PET as a floating underfloor heating system in the bungalow's kitchen and the E-NERGY CARBON FLEECE as ceiling heating in the living room and guest room. In the bathroom, the FLEECE also serves as underfloor heating, supplemented by a comfort heater in the shower. A photovoltaic system was installed to optimize energy consumption.

video

view

video

view

video

view

Underfloor heating
Ceiling heating

Application: Underfloor heating + ceiling heating
Flooring: Tiles + laminate (floating installation)
Top layer fine filler
Panel heating E-NERGY CARBON FLEECE + E-NERGY CARBON PET
Size 117 m²
Ground floor area

System equipment

E-ENERGY CARBON

**Installation of electric underfloor heating** E-NERGY CARBON PET was laid under floating laminate flooring in the kitchen. — electric underfloor heating was installed under floating laminate flooring in the kitchen.

An aluminum-faced insulation membrane forms the substructure.

E-NERGY CARBON PET is especially suitable for floating installation under laminate flooring.

The foil coating makes it resistant to abrasion.

Safe connection with 36 V safety extra-low voltage.

**Ceiling heating installation** The E-NERGY CARBON FLEECE was installed as ceiling heating in the living room and guest room. — Ceiling heating installation : The E-NERGY CARBON FLEECE was installed as ceiling heating in the living room and guest room.

The electric heating film is mounted directly onto the plasterboard.

Thanks to the perforation, the filler easily penetrates the fleece.

The installation of the electric ceiling heating system is quick and easy.

The heating film is diffusion-open and has optimized adhesion.

**Underfloor and Comfort Heating Installation** In the bathroom, E-NERGY CARBON FLEECE was installed directly beneath the tiles as underfloor heating. Additionally, a foil membrane was used in the shower for comfort heating. — Underfloor heating and comfort heating installation: In the bathroom, E-NERGY CARBON FLEECE was installed directly beneath the tiles as underfloor heating. Additionally, a foil membrane was used in the shower for comfort heating.

The low installation height allows for easy installation.

Direct contact with the tile allows for quick and efficient heating of the floor.

The electric heating film is incorporated like a reinforcing fabric.

Electric underfloor heating provides fast, comfortable warmth.

E-NERGY CARBON FLEECE is maintenance-free.

The system is durable thanks to a patented manufacturing process.

Space-saving due to the elimination of wall-mounted radiators.

**Power Supply Installation** Tested and certified power supplies form the core of the innovative E-NERGY CARBON whole-room heating system. The power supplies are controlled by coordinated room temperature controllers. — Power supply installation: Tested and certified power supplies form the core of the innovative E-NERGY CARBON whole-room heating system. The power supplies are controlled by coordinated room temperature controllers.

The power supplies were conveniently installed in the adjacent room.

E-NERGY CARBON uses 36 V SELV safety extra-low voltage with tested and certified power supplies.

Comparison of electricity consumption and consumption of foil heating

E-ENERGY CARBON AS A FULL ROOM HEATING SYSTEM

The bungalow, built to KfW 55 standard, is equipped with the E-NERGY CARBON system for full-room heating. The building covers an area of 117 m² and features a 10.7 kWp photovoltaic system. A 10 kWh battery storage system is also available for efficient energy use.

Up to 30% of energy consumption can be covered by PV electricity.

Analysis of energy consumption

The average electricity consumption for the E-NERGY CARBON system in 2021/2022 was 1362 kWh. Approximately 30% of this was
covered by the photovoltaic system, meaning that only 953 kWh had to be drawn from the grid. Furthermore, a ventilation system with heat recovery is installed.
A fireplace was also installed to create a cozy and comfortable atmosphere. Annual wood consumption amounts to 3 cubic meters.

TOTAL ENERGY COSTS

Using E-NERGY CARBON as a full-room heating system, supported by regeneratively generated PV electricity, results in energy costs of around €300 per year.