FAQ E-NERGY CARBON – Mold in masonry, what to do?

How does the #mold protection work? By raising the temperature of walls and window reveals in critical areas above the dew point to 16-17°C, #mold growth is permanently prevented. This is achieved using sensors that are installed directly in the wall and connected to the power supply, which automatically switches on and off depending on the surface temperature. This means that heating only occurs when needed, without the need for additional control technology. What about the ongoing costs for landlords, tenants, or residents? Since most heating films are easily connected to a standard wall socket via small power supplies, the costs are allocated to the residential unit. These are very moderate at €4.00-€5.00 per linear meter per year for our E-NERGY CARBON FLEECE S heating films. Who can install our CARBON moisture/mold protection? Generally, the fleece heating films, which are only 0.4 mm thin, can be easily installed on the wall and in the window reveals. The heating films (E-NERGY CARBON FLEECE S), specifically designed to be 17.5 cm wide, fit perfectly into window reveals. No thick insulation or complex construction is required. Plug-and-play power supplies further simplify installation, allowing it to be carried out easily by painters, drywallers, tilers, as well as electricians and HVAC technicians without extensive training.