CF PRO 12

Thermal conductive layer as dry screed substitute based on cement

The new generation of dry screeds for residential and office buildings

The cf PRO 12 fiber cement board is a conductive layer for underfloor heating in dry construction. The flat panels are laid floating, are suitable for almost any type of flooring and enable a highly responsive underfloor heating system. Low installation height, low inertia, hoigh heat output and suitability for any flooring – these are the benefits of an underfloor heating with cf PRO 12.

  • Dry installation – simple laying, glued profiled fold connection
  • Thin and robust – only 12 mm installation height with 3.0 kN load capacity
  • Flexibility in flooring – any flooring, also tiles up to 60 x 60 cm or 100 x 100 cm with additional glass fabrics

 


Any flooring

CompactFloor Pro mit verschiedenen BodenbelägenLayered structure: Drywall floor heating, cf PRO 12, Flooring

Thermal output

Thermal output on the basis of DIN EN 1264
Average heating water temperature θm = 35°C
Spread σ = 5 K
  Floor heating
(e.g. System IDEAL)
Installation gap = 250 mm
  Floor heating
(e.g. System IDEAL)
Installation gap = 125 mm
  Room temperature θi = 20°C Room temperature θi = 24°C   Room temperature θi = 20°C Room temperature θi = 24°C
Tiles (Rλ,B = 0.00 m²K/W)   66.9 W/m² 48.7 W/m²   87.8 W/m² 63.8 W/m²
Parquet, Laminate, Design flooring (Rλ,B = 0.05 m²K/W)   52.4 W/m² 38.1 W/m²   65.3 W/m² 47.5 W/m²
Carpet (Rλ,B = 0.10 m²K/W)   43.1 W/m² 31.3 W/m²   52.0 W/m² 37.8 W/m²
Velour, Ready-to-lay parquet (Rλ,B = 0.15 m²K/W)   36.6 W/m² 26.6 W/m²   43.3 W/m² 31.5 W/m²

Cooling capacity

Cooling capacity on the basis of DIN EN 1264
Average cooling water temperature θm = 18°C
Spread σ = 3 K
  Floor heating
(e.g. System IDEAL)
Installation gap = 250 mm
  Floor heating
(e.g. System IDEAL)
Installation gap = 125 mm
  Room temperature θi = 24°C Room temperature θi = 26°C   Room temperature θi = 24°C Room temperature θi = 26°C
Tiles (Rλ,B = 0.00 m²K/W)   19.8 W/m² 26.6 W/m²   24.4 W/m² 32.9 W/m²
Parquet, Laminate, Design flooring (Rλ,B = 0.05 m²K/W)   16.4 W/m² 22.0 W/m²   19.7 W/m² 26.5 W/m²
Carpet (Rλ,B = 0.10 m²K/W)   14.0 W/m² 18.8 W/m²   16.5 W/m² 22.2 W/m²
Velour, Ready-to-lay parquet (Rλ,B = 0.15 m²K/W)   12.2 W/m² 16.4 W/m²   14.2 W/m² 19.1 W/m²

mfh systems GmbH

Hager Feld 8
49191 Belm-Vehrte

+49 (0) 54 06 / 6 99 95-10
This email address is being protected from spambots. You need JavaScript enabled to view it.

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok