CF LIQUID

Two-layer casting compound to be applied as thermal conductive layer

 

Compensatory casting compound for residential and commercial buildings

CompactFloor LIQUID is a two-layer casting compound. An approximately 2 mm thick contact layer levels and fills the voids, the 8 mm thin base layer with integrated fibers ensures a stable and level surface.

The result: High flexibility – walkable after 24 hours and after a drying time of 7 days, all common floorings can be laid.

  • Easy processing – can compensate for partial unevenness
  • Shorter construction – walkable after 24 hours
  • Suitable for all floorings (tile, carpet, parquet, laminate, design flooring)

 

Any floor covering


bodenbelag cf liquid ukLayered structure: Drywall floor heating, CF LIQUID, Flooring

Thermal output

Thermal output on the basis of DIN EN 1264
Average heating water temperature θm = 35°C
Spread σ = 5 K
  Floor heating
(e.g. System IDEAL)
Installation gap = 250 mm
  Floor heating
(e.g. System IDEAL)
Installation gap = 125 mm
  Room temperature θi = 20°C Room temperature θi = 24°C   Room temperature θi = 20°C Room temperature θi = 24°C
Tiles (Rλ,B = 0.00 m²K/W)   83.3 W/m² 60.6 W/m²   110.8 W/m² 80.6 W/m²
Parquet, Laminate, Design flooring (Rλ,B = 0.05 m²K/W)   61.9 W/m² 45.0 W/m²   77.2 W/m² 56.2 W/m²
Carpet (Rλ,B = 0.10 m²K/W)   49.3 W/m² 35.9 W/m²   59.3 W/m² 43.2 W/m²
Velour, Ready-to-lay parquet   41.0 W/m² 29.8 W/m²   48.2 W/m² 35.0 W/m²

Cooling capacity

Cooling capacity on the basis of DIN EN 1264
Average cooling water temperature θm = 18°C
Spread σ = 3 K
  Floor heating
(e.g. System IDEAL)
Installation gap = 250 mm
  Floor heating
(e.g. System IDEAL)
Installation gap = 125 mm
  Room temperature θi = 24°C Room temperature θi = 26°C   Room temperature θi = 24°C Room temperature θi = 26°C
Tiles (Rλ,B = 0,00 m²K/W)   23.2 W/m² 31.2 W/m²   28.6 W/m² 38.5 W/m²
Parquet, Laminate, Design flooringg (Rλ,B = 0,05 m²K/W)   18.6 W/m² 25.1 W/m²   22.3 W/m² 30.0 W/m²
Carpet (Rλ,B = 0,10 m²K/W)   15.6 W/m² 21.0 W/m²   18.3 W/m² 24.6 W/m²
Velour, Ready-to-lay parquet (Rλ,B = 0,15 m²K/W)   13.4 W/m² 18.0 W/m²   15.5 W/m² 20.8 W/m²

mfh systems GmbH

Hager Feld 8
49191 Belm-Vehrte

+49 (0) 54 06 / 6 99 95-10
This email address is being protected from spambots. You need JavaScript enabled to view it.