CF LIQUID

Two-layer casting compound to be applied as thermal conductive layer

 

Compensatory casting compound for residential and commercial buildings

CompactFloor LIQUID is a two-layer casting compound. An approximately 2 mm thick contact layer levels and fills the voids, the 8 mm thin base layer with integrated fibers ensures a stable and level surface.

The result: High flexibility – walkable after 24 hours and after a drying time of 7 days, all common floorings can be laid.

  • Easy processing – can compensate for partial unevenness
  • Shorter construction – walkable after 24 hours
  • Suitable for all floorings (tile, carpet, parquet, laminate, design flooring)

 

Any floor covering


bodenbelag cf liquid ukLayered structure: Drywall floor heating, CF LIQUID, Flooring

Thermal output

Thermal output on the basis of DIN EN 1264
Average heating water temperature θm = 35°C
Spread σ = 5 K
  Floor heating
(e.g. System IDEAL)
Installation gap = 250 mm
  Floor heating
(e.g. System IDEAL)
Installation gap = 125 mm
  Room temperature θi = 20°C Room temperature θi = 24°C   Room temperature θi = 20°C Room temperature θi = 24°C
Tiles (Rλ,B = 0.00 m²K/W)   83.3 W/m² 60.6 W/m²   110.8 W/m² 80.6 W/m²
Parquet, Laminate, Design flooring (Rλ,B = 0.05 m²K/W)   61.9 W/m² 45.0 W/m²   77.2 W/m² 56.2 W/m²
Carpet (Rλ,B = 0.10 m²K/W)   49.3 W/m² 35.9 W/m²   59.3 W/m² 43.2 W/m²
Velour, Ready-to-lay parquet   41.0 W/m² 29.8 W/m²   48.2 W/m² 35.0 W/m²

Cooling capacity

Cooling capacity on the basis of DIN EN 1264
Average cooling water temperature θm = 18°C
Spread σ = 3 K
  Floor heating
(e.g. System IDEAL)
Installation gap = 250 mm
  Floor heating
(e.g. System IDEAL)
Installation gap = 125 mm
  Room temperature θi = 24°C Room temperature θi = 26°C   Room temperature θi = 24°C Room temperature θi = 26°C
Tiles (Rλ,B = 0,00 m²K/W)   23.2 W/m² 31.2 W/m²   28.6 W/m² 38.5 W/m²
Parquet, Laminate, Design flooringg (Rλ,B = 0,05 m²K/W)   18.6 W/m² 25.1 W/m²   22.3 W/m² 30.0 W/m²
Carpet (Rλ,B = 0,10 m²K/W)   15.6 W/m² 21.0 W/m²   18.3 W/m² 24.6 W/m²
Velour, Ready-to-lay parquet (Rλ,B = 0,15 m²K/W)   13.4 W/m² 18.0 W/m²   15.5 W/m² 20.8 W/m²

mfh systems GmbH

Hager Feld 8
49191 Belm-Vehrte

+49 (0) 54 06 / 6 99 95-10
This email address is being protected from spambots. You need JavaScript enabled to view it.

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok