CF BASE 12

Thermal conductive layer based on gypsum fibre for dry construction underfloor heating

Efficiency with only 12 mm thickness – CF BASE 12

 

CF BASE 12 is a thermal conductive layer based on gypsum fibre for dry construction underfloor heating systems. With its low installation height of only 12 mm and high thermal conductivity of 0.44 W/mK, it optimises heat transfer and thus the efficiency of underfloor heating. In addition, CF BASE 12 can also be used in unheated constructions as a pure load distribution plate to save construction height.

Thanks to the tongue-and-groove connection, exact height guidance of the elements between each other is reliably possible. Force-locking bonding is carried out with CF BASE fixed adhesive. An additional screw connection is not necessary!
CF BASE 12 can withstand high loads and, with a maximum surface load of 3.0 kN/m², can be used not only in residential and office buildings but also in light commercial buildings.

 

 

  • Simple and precise installation due to tongue-and-groove connection, no screwing required
  • Optimisation of underfloor heating through high thermal conductivity of 0.40 W/mK
  • Suitable for all floor coverings – tiles up to 60 x 60 cm

mfh systems GmbH

Hager Feld 8
49191 Belm-Vehrte

+49 (0) 54 06 / 6 99 95-10
This email address is being protected from spambots. You need JavaScript enabled to view it.

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok